Juniper Networks RELEASE 8.1.X E320 - Manual (Page 26)

10GE IOA
ES2-S1 10GE IOA IOA label
■ 1 Number of IOA ports
■ First supported: 7.0.1 Software release
■ 40 W
■ Full-height module
■ Uses a range of 10-gigabit small form-factor pluggable (XFP) transceivers to support
different modes and cable lengths.
Description
■ Ethernet (IEEE 802.3ae)
■ 10Gb Base-SR/LR/ER
■ Port can operate in full duplex mode with an average data rate of 3.4 Gbps
Capability
■ See Ethernet IOAs on page 45 for information about the layer 2 and layer 3
protocols and applications that this module combination supports. Software features
■ ES2 4G LM Line module compatibility
■ SRP-100
■ SRP-320
SRP module compatibility
■ Can be paired with an ES2 4G LM.
■ Must be installed in the same redundancy group as an ES2 4G LM and ES2–S1
REDUND IOA combination.
Line module redundancy
compatibility
■ Not applicable Port redundancy support
■ One LC full duplex connector
■ Transmit power:
■ min: –7.3 dBm
■ max: –1.0 dBm
■ Receive input power:
■ min: –9.9 dBm
■ max: –1.0 dBm
■ See the following corresponding table (SR Fiber Optic Cabling) for cabling
requirements.
■ See E320 Hardware Guide, Chapter 5, Cabling the Router for more information.
Cables and connectors
(multimode [SR])
26 ■ 10GE IOA
E320 8.1.x Module Guide