JVC BD-X200E - Manual (Page 23)

E U
E-35
English
Setting the Encoding Format for Audio & Video
The setting of encoding formats for audio and video is carried out from the RECORDER MENU (1/2) screen as described below.
Setting Encoding Formats
ⅥStop the DVD recorder.
1. Open the RECORDER MENU (1/2) screen.
q Press the SET UP button to display the Setup Menu.
w Select RECORDER using the 6 and 7 buttons and then press the SET
button.
2. Make the required settings on the RECORDER MENU (1/2)
screen.
q Select the parameter to be set using the 6 and 7 buttons, and then
press the SET button to display a list of possible settings.
w Select the required setting using the 6 and 7 buttons, and then press
the SET button to adopt it.
3. Complete the setting process.
To do so, carry out one of the following procedures.
• Select MENU and press the SET button to return to the Setup Menu.
• Press the SET UP button to return to the normal screen display.
MENU
CHAPTER CREATION MANUAL
SET INTERVAL Every05Min
TOTAL CONTENTS TIME 01Hour 08Min
AUTO CHAPTER (RECPAUSE) ON
ENCODE QUALITY (Mbps) 8.0
AUDIO ENCODE DOLBY DIGITAL
ASPECT AUTO
RECORDER MENU (1/2)
RECORDER MENU (1/2) screen
SET UP button
SET button
BUSY
OPEN/CLOSE
TOP MENU MENU
OPTION DV Y/C LINE
SET UP
SET
Video Encoding
Item Description
TOTAL CONTENTS TIME If the recording time is already known in advance, by setting the time with this item the BD-X200
will determine the optimum encode bit rate from the remaining capacity on the blank disc and the
recording time.
● If the recording time is set using this parameter, ENCODE QUALITY will be set automatically.
ENCODE QUALITY (Mbps) Specifically, it allows direct setting of the encoding bit rate (i.e., the amount of data per second).
Large values increase the quality of the video; however, this also increases the overall data size.
By changing this setting value the TOTAL CONTENTS TIME item is automatically set.
Setting range:
The range of values that can be set depends on the audio encoding format.
LPCM
: 4.0 to 7.8 Mbps (in 0.2 Mbps steps)
DOLBY DIGITAL : 2.0 to 9.0 Mbps (in 0.2 Mbps steps)
MPEG
: 2.0 to 9.0 Mbps (in 0.2 Mbps steps)
For a setting value of 3.4Mbps or lower, the screen resolution is Half D1 (352 = 576 dots).
For a setting value of 3.6Mbps or greater, the screen resolution is D1 (720 = 576 dots).
35
Setting the Encoding Format for Audio & Video
The setting of encoding formats for audio and video is carried out from the RECORDER MENU (1/2) screen as described below.
Setting Encoding Formats
ⅥStop the DVD recorder.
1. Open the RECORDER MENU (1/2) screen.
q Press the SET UP button to display the Setup Menu.
w Select RECORDER using the 6 and 7 buttons and then press the SET
button.
2. Make the required settings on the RECORDER MENU (1/2)
screen.
q Select the parameter to be set using the 6 and 7 buttons, and then
press the SET button to display a list of possible settings.
w Select the required setting using the 6 and 7 buttons, and then press
the SET button to adopt it.
3. Complete the setting process.
To do so, carry out one of the following procedures.
• Select MENU and press the SET button to return to the Setup Menu.
• Press the SET UP button to return to the normal screen display.
MENU
CHAPTER CREATION MANUAL
SET INTERVAL Every05Min
TOTAL CONTENTS TIME 01Hour 08Min
AUTO CHAPTER (RECPAUSE) ON
ENCODE QUALITY (Mbps) 8.0
AUDIO ENCODE DOLBY DIGITAL
ASPECT AUTO
RECORDER MENU (1/2)
RECORDER MENU (1/2) screen
SET UP button
SET button
BUSY
OPEN/CLOSE
TOP MENU MENU
OPTION DV Y/C LINE
SET UP
SET
Video Encoding
Item Description
TOTAL CONTENTS TIME If the recording time is already known in advance, by setting the time with this item the BD-X200
will determine the optimum encode bit rate from the remaining capacity on the blank disc and the
recording time.
● If the recording time is set using this parameter, ENCODE QUALITY will be set automatically.
ENCODE QUALITY (Mbps) Specifically, it allows direct setting of the encoding bit rate (i.e., the amount of data per second).
Large values increase the quality of the video; however, this also increases the overall data size.
By changing this setting value the TOTAL CONTENTS TIME item is automatically set.
Setting range:
The range of values that can be set depends on the audio encoding format.
LPCM
: 4.0 to 7.8 Mbps (in 0.2 Mbps steps)
DOLBY DIGITAL: 2.0 to 9.0 Mbps (in 0.2 Mbps steps)
For a setting value of 3.4Mbps or lower, the screen resolution is Half D1 (352
= 480 dots).
For a setting value of 3.6Mbps or greater, the screen resolution is D1 (720 = 480 dots).