JVC BD-X200E - Manual (Page 43)

E-69
English
Saving and Reading Edit Lists on the EDL MANAGER Screen
How to operate the EDL MANAGER screen and its contents
The EDL MANAGER screen is for registering edit lists (EDL). Event data from the REMOTE CONTROL screen of this machine can
be saved as edit lists in the EDL MANAGER screen. Also, edit lists registered on the EDL MANAGER screen can be read into the
event register list of the REMOTE CONTROL screen.
Ⅵ To display the EDL MANAGER screen
Select the EDL item on the REMOTE CONTROL screen, then press the
“Enter” key on the keyboard. EXIT
REMOTE CONTROL SCREEN ( 9PIN MASTER )
1
2
3
TC
TC
ADJ BITRATE 8.0 Mbps
SET EDL FINALIZE
EDIT/END CANCEL
No. IN OUT ACTION MENU
STOP
CHAPTER
CHAPTER
00
01 01
01 02
01 03
00 00 00 00
00 01 30 00
00 02 30 00 מ : : :
00 03 30 00
: : : מ ממממממממ
ממממממממ
ממ
ממ
: : : : : : מ : : : : : :
00h
030 min
03m 30s
00 03 30 00 : : :
CHAPTER MANUAL TOTAL DURATION
DISC REMAIN
SOURCE TIMECODE
EDL
EDL01
S
M
EDL02
EDL03
EDL04
EDL05
EDL06
EDL07
EDL08
EDL09
EDL10
BACK
SAVE
IMPORT
LOAD
DELETE
NAME
MANAGER
3.
1.
2.
EDL item
EDL MANAGER screen
EDL item
Function item
Method of operation
Select the EDL item to be used, next select the function item, then execute.
(Example: Save the current setting value of the REMOTE
CONTROL screen as EDL08.)
1. Select the EDL item to be used (EDL08).
Place the cursor on the EDL08 item and press the “Enter” key on the
keyboard.
● The EDL08 item is displayed as highlighted.
2. Move the cursor to the SAVE item, and press the “Enter” key.
● The event data of the REMOTE CONTROL screen is saved in EDL08.
3. To finish operations on the EDL MANAGER screen select the
BACK item, and press the “Enter” key.
● The display returns to the REMOTE CONTROL screen.
Notes
● If a file is registered in the EDL item, the
characters are blue.
● In the case of an edit list for MASTER, “M” is
displayed before the EDL item. In the case
of an edit list for SLAVE, “S” is displayed
before the EDL item.
E-70
Saving and Reading Edit Lists on the EDL MANAGER Screen (continued)
How to operate the EDL MANAGER screen and its contents
EDL item
EDL
EDL01
S
M
EDL02
EDL03
EDL04
EDL05
EDL06
EDL07
EDL08
EDL09
EDL10
BACK
SAVE
IMPORT
LOAD
DELETE
NAME
MANAGER
Item Function
BACK Returns to the REMOTE CONTROL screen.
EDL01 ~ EDL10 Edit list (EDL) registration area.
When selected and the “Enter” key is pressed it is highlighted.
If a file is registered in the EDL item, the characters are blue.
In the front “M” is displayed for MASTER, and “S” is displayed for SLAVE.
SAVE When the EDL item is highlighted and this item is pressed, the current setting values of the REMOTE
CONTROL screen are saved.
LOAD When the EDL item is highlighted and this item is pressed, the selected EDL is registered on the
event register list of the REMOTE CONTROL screen.
However, only M files are valid for a REMOTE CONTROL screen for MASTER, and only S files are
valid for a REMOTE CONTROL screen for SLAVE.
NAME When the EDL item is highlighted and this item is pressed, the EDL item can be named. Up to 20
ASCII characters can be used (up to 16 characters are displayed).
IMPORT When the EDL item is highlighted and this item is pressed, EDL imported from EasyMenu or other
external edit lists are registered. (
☞ Page 71)
DELETE When the EDL item is highlighted and this item is pressed, the selected EDL item is deleted.
About EDL
In SLAVE mode CSV files and SONY format EDL files can be used.
In MASTER mode only CSV files can be used.
CSV files have the same file name for both MASTER and SLAVE modes, but the files are not compatible.
Use the correct format file.
Ⅵ Details of the MASTER mode CSV file
File name: X200.csv
In one line, IN, OUT, ACTION, MENU are written in that order, with a “,” comma in between them.
The IN/OUT time code values are hour minute second frame with a “:” colon between them.
(Example)
00:00:00:00, 00:00:10:00, STOP, 1
00:00:00:00, 00:10:10:00, PAUSE, 0
00:10:20:00,
, ,
* Always enter a line break code at the end of an event.
● For ACTION, if one of the initial characters S, P, C is entered the rest of the characters can be omitted.
● OUT, ACTION, and MENU can be omitted. In this case write a space + a comma.
When ACTION is omitted, the OUT point is ineffective, so the following is done.
If the OUT point is registered
A PAUSE OUT point not registered A CHAPTER
When MENU is omitted, the setting value of the CHAPTER PATTERN item of the PRESET STYLE menu screen is used. (0
display)
Synchronous Recording