JVC BD-X200E - Manual (Page 49)

E-81
English
Dubbing
Setup Procedures
Procedure
Sender device : Insert a finalized disc.
Receiver device : Insert a blank DVD.
Use the DUBBING screen to carry out the dubbing of DVDs.
1. Sender and receiver devices
Open the DUBBING screen on both the sender and receiver devices.
q Press the SET UP button to display the Main Setup menu.
w Use the 6 and 7 buttons to select DUBBING and then press the SET
button.
● The DUBBING screen will appear.
2. Sender and receiver devices
On both the sender and receiver devices, set DVD † DVD from the
DUBBING screen to EXECUTE and press the SET button.
Sender device:
● Search for the receiver device. (☞ Page 82)
Receiver device:
● A confirmation box for the sender device’s IP address is displayed.
3. Receiver device
Set the IP address for the sender device as follows.
q Use the on-screen confirmation box to set the required IP address.
● The IP address of the currently-registered sender device will be displayed.
Press the SET button to use this IP address.
w If setting a new sender-device IP address, set the IP address of the sender
device.
● Use the t and 8 cursor buttons to select the digit to be changed.
● Press the cursor (6/7) buttons to set the value of the selected digit.
● Repeat the above for all digits, select SET using the 8/t buttons and
press the SET button.
● The sender-device IP address set using this dialog box will be registered
as the most up-to-date address on the receiver device.
DVD † DVD RECEIVER
Searching . . .
SENDER IP ADDRESS † 192:168:000:002
ABORT
● When all of the necessary settings have
been made, the status of the sender device
will be displayed on the receiver device’s
monitor.
● This screen will not appear when setting
the sender device first.
MENU
DVD † DVD EXECUTE
DUBBING
DUBBING screen
DVD † DVD dubbing screen
Sender device
Receiver device
IP address for the sender device
1. 2.
2.
3.
DVD † DVD SENDER
RECEIVER Searching . . .
SENDER IP ADDRESS † 192:168:000:002
ABORT
DVD † DVD RECEIVER
SET SENDER IP ADDRESS
192
RECEIVER IP ADDRESS † 192:168:000:003
168 000 002 SET
DVD † DVD RECEIVER
SET SENDER IP ADDRESS
192
RECEIVER IP ADDRESS † 192:168:000:003
168 000 002 SET
To end dubbing:
Sender device : Select ABORT and press the SET button.
The normal screen display will return.
Receiver device : Press the SET UP button to return to the normal screen
display.
E-82
Dubbing DVDs Using the LAN Terminal (continued)
Dubbing (continued)
4. Sender device
The sender device will begin searching for receiver devices.
● When connection has been completed, a dialog box for confirming the start
of dubbing will appear.
● The IP address of the identified receiver device will be displayed in the dialog
box for confirming the start of dubbing.
5. Sender device
To proceed with dubbing, select EXECUTE in the confirmation box for
the start of dubbing and press the SET button.
● DVD to DVD dubbing will begin.
As dubbing is carried out, the state of progress will be displayed on the
monitor connected to each device in the form of a progress bar.
6. Dubbing proceeds to completion.
When dubbing has ended, the display for the sender device returns to the
DUBBING screen.
Finalizing is performed automatically by the receiver device.
State of
progress
Confirmation box for the start of
dubbing
During Dubbing
DUBBING MENU screen
4.
6.
5.
Sender device
Receiver device
DVD † DVD SENDER
RECEIVER Searching . . .
SENDER IP ADDRESS † 192:168:000:002
ABORT
DVD † DVD SENDER
DUBBING
ABORT
DVD † DVD RECEIVER
DUBBING
ABORT
MENU
DVD † DVD EXECUTE
DUBBING
DVD † DVD SENDER
DUBBING START
SENDER IP ADDRESS † 192:168:000:002
RECEIVER IP ADDRESS † 192:168:000:003
EXECUTE CANCEL
Notes
● Dubbing will not be carried out if CANCEL is selected from the
confirmation box for the start of dubbing.
● When dubbing a complete disc, approximately 90 minutes will be
required to complete the process.
● Do not disconnect any cables during the dubbing process.
If cable are accidentally disconnected, both devices should be turned
off once and then restarted before subsequent use.
To cancel dubbing:
If ABORT from the DUBBING screen is selected and confirmed, the
following confirmation box will be displayed.
● Select EXECUTE and then press the SET
button to cancel the dubbing process and
return to the DUBBING menu.
● Select CANCEL and press the SET button
to close the confirmation window without
canceling the dubbing process.
● If dubbing is canceled, the partially-
recorded DVD will no longer be usable.
DVD † DVD SENDER
EXECUTE CANCEL
Aborting makes the media a UNUSABLE !
RECIEVER disc cannot be re-used.
DVD Dubbing