Introduction – JVC BD-X200E User Manual

Page 6

Advertising
background image

E-4

Introduction

Overview of BD-X200 Functions

Video and audio signals from this DVD recorder’s input terminals can be recorded to

DVD-R or DVD-RW (video mode only).

(

☞ Page 29)

The types of signals that can be used are as follows.
Video: Composite video, YC separate, or DV signals (including audio)
Audio: Analog audio or DV signals (including video)

A wide range of recording methods are supported. The appropriate method is to be

selected in accordance with the intended mode of use.

● The REC, PAUSE, and STOP buttons on the front panel can be used for standard operations. (☞ Page 41)

● Recording operations can be carried out using the REC CONTROL panel. Furthermore, a keyboard and mouse can also be

used when recording via this panel. (

☞ Page 43)

● The BD-X200 features an RS-422A terminal. When it is connected to an RS-422A compatible VCR, therefore, RS-422 control

can be used to carry out synchronous recording of the VCR’s video and audio to a DVD. (Various menu settings are required.)
Synchro-recording is carried out from the REMOTE CONTROL screen. (

☞ Page 64)

● When a digital video camera or a DV player is connected to the BD-X200 using a DV cable, and when this DVD recorder is

setup as the master device for DV control (using menu settings), synchronous recording of any video and/or audio signals
from the DV player can be carried out to a DVD. Synchro-recording is carried out from the REMOTE CONTROL screen. (

Page 64)

● The DV IN/OUT terminal can be used to record audio and video from a non-linear editor to a DVD. In such a case, the BD-

X200 must be setup as the control slave (using menu settings).
The DVD recorder will be controlled by the non-linear editor in this type of setup. (

☞ Page 73)

The title and chapter menus can be created either automatically or manually.

(

☞ Page 45)

Five different patterns have been provided as display styles for the title and chapter menus. Each of these patterns is characterized
by different thumbnail characteristics (i.e., number, position, and size) and background images displayed on the title and
chapter menu screens.
When a display style is selected during the recording of content to a DVD, the BD-X200 will automatically create the title and
chapter menus in accordance with this style.
The PRESET STYLE MENU screen can be used to modify the thumbnail and background display characteristics of each of the
display styles.
In addition, the THUMBNAIL EDIT screen and the CHAPTER MENU EDIT screen can be used to modify the display style and
thumbnail images for chapter menus, and also to input chapter names and comments. The input of names or comments is
carried out using a keyboard connected to one of the recorder’s USB terminals.
The TITLE MENU EDIT screen can be used to modify the display style for the title menu and to enter title names.

DVD dubbing can be carried out using the LAN terminal.

This terminal allows two BD-X200 DVD recorders to be connected using a LAN cable, and the recorders can then operate as
master and receiver devices during the dubbing of DVDs. (

☞ Page 79)

The BD-X200 can be used to play discs that it has created.

(

☞ Page 59)

● Once a disc has been finalized, it can also be played on other DVD players.

E-5

English

Precautions for DVD Recorder Use

Storage & Usage Locations

The storage and usage of this DVD recorder in the following
types of location should be avoided.
● Areas at temperatures which deviate by a significant degree

above or below the permitted service temperature range
(i.e., 5°C to 35°C).

● Areas at humidities which deviate by a significant degree

above or below the permitted service humidity range (i.e.,
20% to 80% RH).

● Areas where a large amount of dust or sand is present.

● Areas where the DVD recorder may come into contact with

oily smoke or steam, such as in kitchens or in their
immediate vicinity.

● Areas that are unstable or where significant vibration occurs.

● Areas where condensation occurs readily.

● Areas where strong magnetic fields are generated by

transformers, motors, or the like.

● Areas where transceivers, mobile phones, and other

wireless-communication devices are present.

● Areas that are subjected to X-ray irradiation or where

corrosive gases are present. (This precaution must be
strictly observed.)

Handling

● Ensure that this DVD recorder is placed on a flat, horizontal

surface for use.

● Do not place heavy objects such as a monitor on top of the

DVD recorder.

● Do not insert foreign objects into the disc tray opening.

● Be careful not to get your fingers clamped when loading

the disc to prevent injury.

● Do not block the fan’s ventilation holes.

● Avoid knocking or dropping this DVD recorder.

● When the DVD recorder is to be moved, ensure that any

DVD it contains is removed in advance.

● If the DVD recorder is not to be used for an extended period

of time, please disconnect the AC adaptor to avoid wasting
electricity.

Cleaning the Exterior (with the power off)

Use a soft cloth when cleaning the outside of this DVD
recorder.
Do not use paint thinners or organic solvents as cleaning
agents.
Failure to observe these precautions can result in discoloration
or melting of exterior surfaces.
When stubborn dirt is present, wipe away using a cloth soaked
in a dilute neutral solvent.

Always use the AC adaptor provided with this DVD

recorder.

Always use the power cord provided with this DVD

recorder.

The usage of a different type of cord or a damaged cord can
result in the outbreak of fire or electric shocks.

The power cord or the AC adaptor supplied with this

DVD recorder should not be used with any other device.

Before connecting the BD-X200 to other devices,

turn those devices off and then carry out setup
procedures as described in the corresponding
user’s manuals.

The DVD drive unit is an expendable part. Although

the service life of the DVD drive unit differs depending
on the usage environment of the customer, replacement
every 1000 hours as a guide is recommended. (

Page

87 “TOTAL RECORDING TIME”)

Precautions Regarding Condensation

ⅥCondensation

When cold water is poured into a glass and droplets of
water form on its outer surface, this moisture is referred
to as “condensation”.

ⅥWhen condensation occurs

Condensation can cause water droplets to adhere to the
DVD recorder’s internal lens, thus making normal
operation impossible.

ⅥCondensation occurs easily in the following situations,

and the appropriate care should be taken.
• When the DVD recorder is moved from a cold location

into a warm room.

• When the room containing the DVD is rapidly heated.
• When an air conditioner’s air duct is pointing straight at

the DVD recorder.

ⅥIn situations where it is likely that condensation will occur,

remove any DVD that may be present in the BD-X200
and then turn the power on. As the interior heats up,
condensation will be less likely to occur.

ⅥCondensation is a principal cause of the inability to play

discs and other similar problems. In this type of situation,
allow the DVD recorder to remain inactive with its power
on for several hours. If the problem persists after this
period of time has elapsed, contact either the store where
the BD-X200 was purchased or your nearest JVC
Authorized dealer.

Extended Periods of Inactivity

Performance may deteriorate over extended periods of
inactivity; for this reason, the power should be turned on
and the DVD recorder should be operated at regular
intervals.

Compensation for Damaged Content

ⅥJVC accepts no responsibility whatsoever for damages

incurred as a result of an inability to play or record audio
and video content in the rare event that this DVD recorder,
a DVD-R, or a DVD-RW fails to operate correctly.

ⅥIt is recommended that discs containing important content

be backed up at regular intervals (i.e., on a yearly basis).
Although digital signals do not deteriorate, storage
environments can have an effect on a disc’s aging
characteristics, and this may result in an inability to play
or record.

ⅥIf a disc should break, there will be no way to recover

data from it.

ⅥProper playback of discs recorded using this DVD recorder

on all devices is not guaranteed.

Advertising