SUPER MICRO Computer MICRO COMPUTER MOTHERBOARD P8SC8 - Manual (Page 11)

Chapter 1: Introduction
1-5
P8SC8/P8SCi Quick Reference
J u m p e r s Description Default Setting
JBT1 CMOS Clear See Section 2-7
JPA1 (*P8SC8) SCSI CTRL Enable Pins 1-2 (Enabled)
JPF Power Force-On Open (Normal)
JPL1/JPL2 LAN1/LAN2 Enable Pins 1-2 (Enabled)
JPUSB1 USB Wake Up (USB1/2) Pins 2-3 (Disabled)
JPWAKE1 KB/Mouse Wake-Up Pins 2-3 (Disabled)
JWD Watch Dog Pins 1-2 (Reset)
Connectors Description
ATX Power 24-Pin Power Connector
4-Pin Power 4-Pin Power Connector
COM1, COM2 COM Port/Serial Port 1 & Port 2 Connectors
Fans 1-5 Fan1: CPU Fan, Fan2-5: Chassis Fan Headers
DIMM#1A,#2A,#1B,#2B Memory (DIMM) Slots (1 through 4)
Floppy Connector Floppy Disk Connector
IDE IDE Connector
IPMI IPMI 2.0 Socket
J9 Internal Speaker (Buzzer) Enable
JL1 Chassis Intrusion Header
JLED Power LED Connector
JSLED SATA LED Connector
JWOR Wake-On-Ring Header
Keyboard/Mouse(J14) PS/2 Keyboard/Mouse
LE1 Onboard +5V Standby Warning LED
LAN Ports Giga-bit Ethernet RJ45 (LAN1/LAN2) Connectors
Parallel (J11) Printer Port
PCI slots (*Note 2) One: PCI 33MHz slot, One: PCI-X133/100MHz slot
PCI-E Two PCI-Express x1 slots
SATA #0-3 4 SATA Headers
SCSI (*P8SC8) SCSI Channel A, Channel B Connectors
SMB (J5) System Management Bus Header
USB 0/1 Back Panel Universal Serial Ports1/2
USB 2/3/6/7 (J10, J7) Front Panel USB Headers 2/3(J10), FPUSB 6/7(J7)
V G A Video/Graphic Connector
(*Note: P8SC8 supports PCI-X 100MHz only. P8SCi supports PCI-X
up to 133MHz.)