13 cpu warning temperature – SUPER MICRO Computer MICRO COMPUTER MOTHERBOARD P8SC8 User Manual
Page 65
Chapter 4: BIOS
4-13
CPU Warning Temperature
This allows you to set the CPU warning temperature. If the CPU temperature
reaches this threshold, an alarm will activate and a warning message will
be displayed onscreen. The options are "Disabled", "60
0
C/140
0
F", "65
0
C/
149
0
F", "70
0
C/158
0
F", "75
0
C/167
0
F", "80
0
C/176
0
F" and "85
0
C/185
0
F". (*See the
note below.)
Note: In the Windows OS environment, the Supero Doctor III settings take
precedence over the BIOS settings. When first installed, the SD III adopts
the temperature threshold settings previously set in the BIOS. Any subse-
quent changes to these thresholds must be made within Supero Doctor,
since the SDIII settings override the BIOS settings. For the Windows OS to
adopt the BIOS temperature threshold settings, please change the SDIII set-
tings to be the same as those set in the BIOS.
Highlight this and hit <Enter> to see monitor data for the following items:
CPU Temperature:
S y s t e m T e m p e r a t u r e :
In addition to temperature monitoring, the status of the following items will
also be displayed:
Fan 1 Speed-Fan 5 Speed
Voltage Monitoring
Processor Vcore (V), 3.3V Vcc (V), 5V Vcc (V), -12V Vcc (V), +12V
Vcc (V), 5V Standby, VBAT
Fan Speed Control (Fan1-Fan5)
When set to 3-pin, the onboard fan speed is controlled by the CPU tem-
perature. When the CPU temperature is higher, the fan speed will be higher
as well. If set to "Disable," the fan speed control is disabled and the
onboard fan will run at the full speed (12V) at all time. The options are:
"Disable" and "3-pin Server".