Sharp FO-IS125N - Manual (Page 103)

Send Hold Function (Fax Only)
101
5. Secur
ity
Functions
Sending a fax when the Send Hold function is activated
1
Load the document(s).
•
If desired, press to set the resolution and/or contrast.
2
Enter the fax number using one of the methods below:
•
Press a Rapid Key.
•
Press , enter a 3-digit Speed Dial number, and press .
•
Enter the full fax number with the number keys and press .
•
Press or until the name or number of the other party appears in
the display, and press .
3
Check the name or number that appears in the display. If it is correct,
press to begin dialing and transmission.
•
If the name or number is not correct, press to clear it.
RESOLUTION
SPEED DIAL
START
START
START
START
STOP