Sharp FO-IS125N - Manual (Page 89)

Secure Fax
87
5. Secur
ity
Functions
Clearing the Secure code
To clear the Secure code, follow the steps below.
♦
Secure Fax must be deactivated (see page 86) before you can clear the
Secure code.
1
Press , make sure that [SECURE FAX] appears, and
press .
•
If the display shows [ENTER PASSWORD] after you press
, enter the administrator code and press .
2
Press until [SECURE CODE] / [1 = SET, 2 = CLEAR] appears.
3
Press to select “CLEAR”.
4
Enter the Secure code.
5
Press .
•
The display will briefly show [SECURE # CLEAR] / [CLEARED].
•
If the wrong code is entered, [WRONG SECURE #] will appear. Go back to
Step 4. (If the wrong code is entered 3 times in a row, you will return to the
standby display.)
6
Press to exit.
SECURE
SECURE
START
START
STOP