Sharp FO-IS125N - Manual (Page 136)

Timer Transmission
134
7
Press .
8
Enter the fax number using one of the methods below:
•
Rapid Key Dialing: Press a Rapid Key.
•
Speed Dialing: Press and enter a 3-digit Speed Dial number.
•
Search Dialing: Press or until the name or number of the other
party appears in the display.
•
Group Dialing: Press a Group Key. Go directly to Step 11 (once a group
key is selected, no further destinations can be entered).
•
Direct Keypad Entry: Enter the full fax number with the number keys. Go
directly to Step 11 (when a full fax number is entered, only one destination
can be entered).
9
Press . If you wish to enter more destinations, go to Step 10. If you
have finished entering destinations or are only entering one destination,
go to Step 11.
10
Repeat Steps 8 and 9 for each of the destinations that you wish to enter.
(A maximum of 50 destinations can be entered.)
•
You can press to scroll through and check your entered destinations.
To delete a destination, press when it appears.
11
Press .
•
The document will be scanned into memory and the timer number
assigned to the job will appear briefly in the display. Transmission will take
place at the specified time.
•
If [MEMORY FULL] appears, see If the memory becomes full on page 112.
START
SPEED DIAL
DEL
START