Sharp FO-IS125N - Manual (Page 94)

Authorized Transmission
92
Using the operation panel to edit and delete supervisors
Follow the steps below if you need to edit the information stored for a
supervisor or delete a supervisor.
1
Press , then until [AUTH. TRANSMISSION]
appears.
•
If the display shows [ENTER PASSWORD] after you press
, enter the administrator code and press .
2
Press , then until [AUTHORIZED APPROVER] appears.
3
Press .
4
Press or until the supervisor that you wish to edit or delete
appears and press .
5
Press for “EDIT” or for “CLEAR”.
•
If you selected “CLEAR”, go to Step 9.
SECURE
SECURE
START
8
Press .
9
Return to Step 4 to store another supervisor, or press to exit.
START
STOP