Siemens HIPATH 8000 - Manual (Page 116)

Step by step
Privacy/security
116
Do not disturb
If "Do not disturb" is activated, your telephone will not
ring. The caller hears the busy signal.
Prerequisite: A programmable key is assigned the
function "Do Not Disturb" (see
page 50). "Do not dis-
turb" must be activated ( page 117).
Enabling do not disturb via a key
S
Press the "Do not disturb" programmable key.
R
Press the lit programmable key once more to deactivate
the "Do not disturb" function.
or
Enabling do not disturb via the idle menu
Select and confirm the option shown in the idle menu.
The "Do not disturb" icon appears in the header.
or
Select and confirm the option shown in the idle menu.
The "Do not disturb" icon is deleted.
On multi-line telephones ( page 13) you can
only activate the "Do not disturb" function for
your primary line.
You can also use the programmable key to acti-
vate the "Do not disturb" function during a call or
deactivate it when an incoming call is being sig-
naled.
Do not disturb on
Do not disturb off