Answering a call via the headset – Siemens HIPATH 8000 User Manual
Page 16
Step by step
Basic functions
16
Answering a call via the headset
Prerequisite: A headset is connected.
The phone is ringing. The
o key flashes.
o
Press the key shown.
if nec.
+-
Set the call volume.
Answering calls automatically via the headset
Prerequisite: The administrator has additionally config-
ured a key with the "Auto-Headset function (AICS Zip
tone) (
page 50).
S
Press the "Auto-Headset" sensor key to activate auto-
matic call answering. This key and the headset key illu-
minate.
A short acoustic signal is heard on the headset for a call
and the connection is established.
If you want to manually answer calls again, deactivate
the automatic answering function using the "Auto-
Headset" key. Both keys are off.
Make sure your headset port is set up properly