Recording conversations, Using the call recording feature, Automatic call recording – Siemens HIPATH 8000 User Manual
Page 174
Advertising
Step by step
Call recording
174
Recording conversations
Using the call recording feature
The recording function can be used in a similar way to a
recorder, for example for recording music. The recorder
can be:
•
switched on (standby
.
)
•
switched off or stopped (
~)
•
started (
/)
•
paused (
@)
The symbols used here by way of example can be found
on practically any hardware and software recorder.
Automatic call recording
This is the simplest mode. If you have accepted a call or
called a subscriber and the subscriber answers, the call
is recorded automatically. Refer to
page 172 to check
which calls this can be.
As soon as the recording starts, you will see the
recording symbol
|
and hear a beep (see also
You cannot pause the recording manually in this mode.
Advertising