Siemens HIPATH 8000 - Manual (Page 35)

Basic functions
35
Step by step
Ending a consultation call
You end the consultation
Select and confirm the option shown in the second
party's context menu.
The consultation call is disconnected. The call with the
first party is resumed.
The second party hangs up
If the second call partner hangs up, you will be prompt-
ed to retrieve the first call again if "Hold and hang-up" is
disabled (
page 66). Otherwise, the first call will re-
main on hold until you receive this prompt after a de-
fined time interval.
Confirm the option shown. You are reconnected with
the first party.
Ending the consultation with an active headset
Prerequisite: The administrator has additionally config-
ured a key with the "Auto-Headset" function (AICS Zip
tone) (
page 50).
S
Press the "Auto-Headset" sensor key to activate auto-
matic call answering. This key and the headset key
illuminate.
[
You make a consultation call and the second party
hangs up. You are automatically reconnected with the
waiting first party. The prompt "Retrieve held call" does
not appear.
Disconnect & return
Retrieve held call
If the call is kept on hold, you can retrieve the call
via the context menu before the set time expires.