StorageTek 9840 - Manual (Page 147)

95741 Sixth Edition 5-31
Jammed Cartridge
1. Power off the CSL if power is applied ( “Power On/Off CSL” on page 5-12 ).
2. Remove all cartridges from the input and output bins.
3. Locate the MUD screw within the CSL input bin (upper-left area).
Note: The CSL MUD screw is located to the right of the feed channel.
1. Mud screw
2. Input bin
3. Feed channel
4. Obtain a long-common 1/8 in. screwdriver and insert it into the MUD slot.
5. Press against the spring-loaded MUD screw until it stops.
Note: Do not turn the screwdriver CCW when removing a jammed cartridge.
6. Slowly turn the screwdriver CW to remove the jammed cartridge (may take
approximately ten turns).
a. Turn the MUD screw until it will not turn any further. This action lowers the reel
motors within the drive.
C53667
1
3
2
C53668