StorageTek 9840 - Manual (Page 217)

95741 Sixth Edition A-1
A Specifications
This appendix provides specifications for the 9840 Tape Drive. It contains:
• “Power Requirements”
• “Site Power Connector Requirements” on page A-2
• “Environmental Requirements” on page A-3
• “Cartridge Tape Specifications” on page A-5
• “Drive Performance” on page A-6
• “Host Interfaces” on page A-7
• “Library Attachments” on page A-7
• “Non-Library Drive Installations” on page A-8
• “Supported Device Modes” on page A-8
• “Host Hardware and Software Attachments” on page A-8
■
Power Requirements
The specifications shown in Table A-1 reflect power requirements for each 9840
Tape Drive installed as a desktop and rack-mount drive tray .
Table A-1. Power Requirements
Characteristics Value
Input voltage 100 to 240 VAC
Input frequency 50 to 60 Hz
Power consumption 101 VA
Power dissipation 345 Btu/hr
Power factor 0.95 minimum