Install and lock, Install and lock -37, Figure 5-23. mud screw in csl -37 – StorageTek 9840 User Manual
Page 153
Advertising
95741
Sixth Edition
5-37
Shipping Insert
Install and Lock
Follow these instructions to properly install and lock the shipping insert into a
CSL. Before you can lock the shipping insert into the CSL, you must use the
MUD screw (
) to raise the reel motors and to lower the cleaning
brush within the drive.
CAUTION:
If the shipping insert is not locked into the tape drive, the drive head will
become damaged in shipment.
Notes:
•
Only use the MUD mechanism to reset the drive for shipping.
•
The MUD screw must be turned CCW to reset the drive to its
shipping position and to install and lock the shipping insert into the
drive.
Figure 5-23. MUD Screw in CSL
1. MUD screw
2. Input bin
3. Feed channel
C53667
1
3
2
Advertising