StorageTek 9840 User Manual
Page 94
Rack-mountable Tray
3-44
Sixth Edition
95741
4. Remove the shipping insert (see figure) by performing these steps:
a. Move the input bin slider to the right and hold it in this position.
b. Reach through the CSL input bin to access the handle of the shipping insert.
c. Squeeze both sides of the handle together and pull it out from the cartridge loading
aperture.
d. Continue to pull on the shipping insert handle until it reaches the mouth of the feed
channel.
e. Release pressure on the input bin slider and return it to the extended position.
f.
Press down on the cartridge stop mechanism at the base of the feed channel.
g. Grasp the handle of the shipping insert and pull it out of the feed channel.
5. Store the shipping insert.
Note: The shipping insert should be installed in the drive whenever the CSL tray is returned
to StorageTek for any reason.
6. Repeat Steps 1 through 5 if there are other CSL trays in the rack.
1. Feed channel
2. Shipping insert
3. Input bin
4. Cartridge stop mechanism
C53683
1
4
3
2