Schneider Electric 66123 - Manual (Page 47)

Network Management Card & Modbus/Jbus 34022321XT indice :AE Page 47/98
Network Management Teleservice Card
APC by Schneider Electric
www.apc.com
6.4.5 Access control
Click on "Access Control" in the menu.
To access this page, the login and password are systematically requested if they have not already been entered.
This menu enables configuration of the different parameters enabling secure access to the card via a browser or SNMP.
Login: This text field is limited to 10 characters. - Enables secure access and modification of pages. Default value "MGEUPS".
Change / Confirm password: This text field is limited to 10 characters. - Enables secure access to Configuration menu pages. Default value
"MGEUPS".
Current Community Read name: Indicates the SNMP community name used for read operations.
Change Community Read-Only: This text field is limited to 49 characters - Enables the SNMP community name used for read operations to
be changed.
Security mode: manages the various authentication methods for page access
Authentication for configuration: Only the configuration pages are protected by login / password.
Full authentication: All pages are protected by login / password.
SSL and full authentication: All pages are protected by login / password and are only accessible in SSL
SSL Access: When selected, access to the Web interface is made in secure mode (https).
Connections with Network Shutdown Modules stay in standard mode (secure TCP)
SSL Security Implementation:
SSL version 3.0
TLS version 1.0
Method TLS_RSA_WITH_512_MD5
Auth RSA
Key Exchange RSA
Encryption RC4_512
Digest MD5
Changes take effect after a card reboot