Sony CDX-C560 - Manual (Page 11)

11
EN
Other Functions/CD/MD Changer
SEEK
AMS
SEEK
AMS
Automatically scrolling a disc name
— Auto Scroll
If the disc name or track name on an MD
exceeds 8 characters and the Auto Scroll
function is on, automatically scrolls on the
display as follows:
• The disc name appears when the disc has changed (if the
disc name is selected).
• The track name appears when the track has changed (if
the track name is selected).
• The disc or track name appears depending on the setting
when you press (SOURCE) to select an MD.
If you press (DSPL) to change the display
item, the disc or track name of the MD is
scrolled automatically whether you set the
function on or off.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until “A.SCRL” appears.
2
Press (4) (n) to select “A.SCRL-ON.”
3
Press (SHIFT).
To cancel Auto Scroll, select “A.SCRL-OFF” in
step 2 above.
Displaying the recording date of
the currently selected MD
Press (DSPL) for two seconds during MD
playback.
The recording date of the track is displayed
for about three seconds.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you
want to skip.
Locating a specific point in a track
— Manual Search
During playback, press and hold either
side of (SEEK/AMS). Release the button
when you have found the desired point.
To locate succeeding tracks
To locate preceding tracks
To search forward
To search backward
Locating a disc by disc number
— Direct Disc Selection
Press the number button corresponding
to the desired disc number.
The desired disc in the currently selected
changer begins playback.
Scanning the tracks
— Intro Scan
You can play the first 10 seconds of all the
tracks on the currently selected disc.
1
During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
“INTRO” appears.
2
Press (4) (n) to select “INTRO-ON.”
Intro Scan starts.
3
Press (SHIFT).
To go back to the normal playback mode,
select “INTRO-OFF” in step 2 above.
Playing tracks repeatedly
— Repeat Play
You can select:
• REP-1 to repeat a track.
• REP-2 to repeat a disc.
• REP-3 to repeat all the discs in the current
changer.
1
During playback, press (SHIFT).
2
Press (6) (REP) repeatedly until the
desired setting appears.
z REP-1 z REP-2 z REP-3 z REP-OFF
Repeat Play starts.
3
Press (SHIFT).
To go back to the normal playback mode,
select “REP-OFF” in step 2 above.