Siemens C450 IP - Manual (Page 11)

10
First Steps
Gigaset C450 IP / IM-Nord EN / A31008-M1713-R201-3-7643 / starting.fm / 01.03.2007
Ve
rs
ion 4,
16
.09.
2005
Making settings for VoIP
telephony
Before you can use the Internet (VoIP) to
phone any other users on the Internet, the
fixed network or the mobile phone net-
work, you need the services of a VoIP pro-
vider who supports the VoIP SIP standard.
Precondition: You have registered with a
VoIP provider (e.g. via your PC) and set up
an account.
The following phone settings are neces-
sary in order for you to use VoIP. You will
receive all information from your VoIP pro-
vider.
u Your user name with the VoIP provider,
if this is required by the VoIP provider
u Your registration name
u Your password with the VoIP provider
u VoIP provider general settings
The connection wizard will help you with
the settings.
Starting the connection wizard
Precondition: The base station is con-
nected to the mains power supply and the
router. Your router is connected to the
Internet.
Tip: If VoIP (
IP) is activated as the default
connection for your phone (default set-
ting page 25), the phone will attempt to
make a direct connection to the server
belonging to your VoIP provider after the
connection wizard is closed. If incorrect/
incomplete information means that the
connection cannot be made, messages
will be displayed (page 11).
Once the handset battery is sufficiently
charged, the message key f on the hand-
set will flash (around 20 minutes after you
have put the handset in the charging cra-
dle).
¤
Press the message key f.
You will see the following display:
§Yes§ Press the display key to start
the connection wizard.
~ Enter the system PIN of the
base station (the default is
0000) and press §OK§ .
Downloading VoIP provider data
The phone establishes a connection with
the Siemens server on the Internet. Pro-
files with general access data for various
VoIP providers can be downloaded here.
The message Select country is displayed.
After changing the display:
q
Select country and press §OK§ .
Select provider is displayed.
After changing the display:
q
Select VoIP provider and press
§OK§ .
The necessary data for your VoIP provider
is downloaded and saved on the phone.
Please note:
Your phone is preconfigured for dynamic
assignment of the IP address. In order for your
router to "recognise" the phone, dynamic IP
address assignment (the router's DHCP server)
must also be activated on the router.
Please note:
The connection wizard will also start automat-
ically if you try to establish a connection via
the Internet, before you have made the neces-
sary settings.
You can also call up the connection wizard at
any time via the menu (page 15).
Please note:
If the data for your VoIP provider is not avai-
lable for download, you must make the neces-
sary settings with the Web configurator at a
later stage (page 26).
Press the display key
§Back§ to carry out the fol-
lowing steps of the connection wizard
(see "Entering VoIP user data").
Start VoIP
Connection
Assistant?
§§§§No§§§§ §§§§§Yes§§§§