Siemens C450 IP - Manual (Page 22)

21
Using the directory and lists
Gigaset C450 IP / IM-Nord EN / A31008-M1713-R201-3-7643 / directories_charges.fm / 01.03.2007
Ve
rs
ion 4,
16
.09.
2005
Opening lists with the
message key
You can use the message key f to open
the following lists:
u SMS list
u Network mailbox
If your network provider supports this
function and the network mailbox is
configured for fast access via key 1
(page 14).
u Calls list (precondition: Calling Line
Identification enabled)
The numbers of the last 30 outgoing
calls are saved. Multiple calls from the
same number are only saved once (the
last call).
An advisory tone sounds as soon as a new
message arrives in a list. The message key
f flashes. A message appears in the dis-
play.
If you press the flashing
f key, you will
see all the lists that contain new mes-
sages. If only one list contains new mes-
sages, this will be opened automatically.
Opening list
f
¢
If necessary, select list
q Select entry.
For additional information on the lists,
please see the full user guide for your
Gigaset C450 IP (page 5).
Dialling with directory/list
¤
Open directory/list.
¤
Select entry with q.
¤
Briefly press/press and hold the talk
key c (page 16).
Please note:
If calls are saved in the network answering
machine you will receive a message if the
appropriate settings have been made (see the
network mailbox instructions of your network
provider).
Please note:
You can only dial IP addresses via VoIP.