Siemens C450 IP - Manual (Page 25)

24
Setting handset/base station
Gigaset C450 IP / IM-Nord EN / A31008-M1713-R201-3-7643 / settings_bs_hs_pabx.fm / 01.03.2007
Ve
rs
ion 4,
16
.09.
2005
Using the handset as an
alarm clock
Activating/deactivating the alarm
clock
§Menu§
¢
Alarm Clock
¢
Activation
( ‰ = on)
Or:
g
Press the alarm clock key.
After you activate the alarm clock, the
menu for setting the wake up time opens
automatically (page 24).
Setting the wake up time
§Menu§
¢
Alarm Clock
¢
Wake up time
¤
Enter the wake up time in hours and
minutes, then press §OK§ .
When the alarm clock rings…
Alarm repeat after 5 minutes
§Snooze§ Press the display key or any
key.
If you press §Snooze§ three times the alarm
clock switches off for 24 hours.
Switching off the alarm clock for 24 hours
§Off§ Press the display key.
Changing the base station
system PIN
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
PIN known only to yourself.
§Menu§
¢
Settings
¢
Base
¢
System PIN
~ Enter current system PIN and
press §OK§ .
~ Enter your new system PIN
and press §OK§ .
~ Now re-enter the new system
PIN and press §OK§ .
For security reasons, "****" is displayed
instead of the numbers entered.
a Press
and hold (idle status).
Restoring the handset default
settings
Each individual handset setting is reset, in
particular the language, display, volume,
ringer tone, advisory tones and alarm
clock settings (page 23).
The last number redial list is cleared.
Entries in the directory, the date and time,
the calls list and the handset's registration
to the base station will be retained.
§Menu§
¢
Settings
¢
Handset
¢
Reset Handset
§OK§ Press the display key to
confirm.
a Press and hold (idle status).
Cancel the reset with a.