Siemens C450 IP - Manual (Page 8)

7
First Steps
Gigaset C450 IP / IM-Nord EN / A31008-M1713-R201-3-7643 / starting.fm / 01.03.2007
Ve
rs
ion 4,
16
.09.
2005
Please note:
u Always repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and insert
them in again.
u The batteries may warm up as they are
charging. This is not dangerous.
u After a while the charge capacity of the
batteries will decrease for technical rea-
sons.
Setting the date and time
§Menu§
¢
Settings
¢
Date/Time
~ Enter the day, month and year
with 6 digits and press §OK§ . Use
q to move between the fields.
~ Enter hours and minutes with
4 digits (e.g. 0 7 1 5 for 07.15
hrs) and press §OK§ . Use q to
move between the fields.
The date and time are shown in the hand-
set's idle display (page 1).
Registering the handset to the base
station
Your handset is registered to the base sta-
tion by default.
For how to register other handsets to the
base station and make internal calls free of
charge, please see the full user guide
(page 5).
Installing the base station
The base station is designed for use in
closed, dry rooms with a temperature
range of +5 °C to +45 °C.
¤
Install/hang your base station at a cen-
tral point in the house.
Mounting the base station on a wall
Please note:
u Never expose the telephone to heat
sources, direct sunlight or other electri-
cal appliances.
u Protect your Gigaset from moisture,
dust, corrosive liquids and vapours.