Overview of the remote control buttons – Sony WEGA KLV-17HR2 User Manual
Page 24
22
Overview
Overview of the Remote Control Buttons
f
Selecting a screen format:
Press this button repeatedly to change the screen format. For more details, refer to “Screen Control”
on page 36.
g
Selecting Teletext:
Press this button to switch on Teletext. For more details, refer to “Teletext” on page 45.
h
/
/
/
/OK buttons
a) If the TV is selected:
• When the menu is displayed, use these buttons to operate the menu system. For more details, refer to
“Introducing and Using the Menu System” on page 31.
• When the menu is turned off, press OK to show an overview of all TV channels. Then press
or
to select the channel and press OK to watch the selected channel.
b) If the VCR or DVD is selected:
Use these buttons to control the main functions of your VCR or DVD.
i
Recording programmes on your VCR:
If the VCR is selected, press this button to record programmes.
a
Switching the TV to the standby mode:
Press this button to temporarily turn off the TV
and switch it to the standby mode (the
(Standby/Sleep) indicator on the TV lights up in
red). Press it again to switch on the TV from the
standby mode.
To save energy, we recommend switching the
TV off completely when the TV is not in use.
If no signal is received or no operation is
performed in the TV mode for 10
minutes, the TV automatically switches
to the standby mode.
b
Selecting the input source:
Press this button repeatedly until the input
symbol of the desired source appears on the
screen.
c
Selecting channels:
Press this button to select channels.
For double-digit programme numbers, enter the
second digit within 2.5 seconds.
d
a) If the TV is selected:
Press this button to watch the last channel
selected (the last channel watched for at least
five seconds).
b) If the VCR is selected:
For Sony’s VCR double-digit programme
numbers, e.g. 23, press this button first then
press the 2 and 3 buttons.
e
Programming the remote control:
Use this button to programme the remote control
to operate your VCR or DVD. For more details,
refer to “Remote Control Configuration for
VCR/DVD” on page 53.