Sony WEGA KLV-17HR2 User Manual
Page 25
23
Overview
GB
j
Selecting the VCR, TV or DVD (Media Selector):
With this remote control you can operate not only this TV but also the main functions of your VCR or
DVD.
Switch on the equipment you want to operate and press this button repeatedly to select VCR, TV, or
DVD. The green light just above the selected equipment lights up momentarily.
k
Selecting channels:
Press these buttons to select the next or previous channel.
l
Displaying NexTView:
For more details, refer to “NexTView” on page 46.
m
Adjusting the TV volume:
Press these buttons to adjust the volume of the TV.
n
Displaying the menu system:
Press this button to display the menu on the screen. Press it again to remove the menu display from the
screen.
o
Selecting the TV mode:
Press this button to switch off Teletext or video input.
p
Selecting a sound effect:
Press this button repeatedly to change the style of sound used by your TV. For more details on the
styles available, refer to “Sound Adjustment” on page 34.
q
Selecting a picture mode:
Press this button repeatedly to change the picture mode. For more details, refer to “Picture
Adjustment” on page 32.
r
Displaying on-screen information:
Press this button to display all on-screen indicators. Press it again to cancel.
s
Muting the sound:
Press this button to mute the sound from the TV. Press it again to restore the sound.
t
Switching the VCR or DVD on/off:
Press this button to switch your VCR or DVD on or off.
u
Turning on the Sleep Timer function:
Press this button to set the TV to automatically switch to the standby mode after a specified time
period. For more details, refer to “Sleep Timer Function” on page 44.
An initial setup is required to synchronise this remote control to your VCR or DVD. This setup
depends on the manufacturer. For more details, refer to “Remote Control Configuration for
VCR/DVD” on page 53.
In addition to the TV functions, all coloured buttons are also used for Teletext operations. The
buttons with green symbols (except for
(NexTView) and
(Power/Standby)) are also
used. For more details, refer to “Teletext” on page 45.