Sony WEGA KLV-17HR2 User Manual

Page 61

Advertising
background image

59

Additional Information

GB

Distorted picture when changing
programmes or selecting Teletext

• Turn off any equipment connected to the Scart connector on

the rear of the TV.

Wrong characters appear when viewing
Teletext.

• Using the menu system, select the “Language” and

“Country” options in the “Set Up” menu and set the language
and country/region in which you view Teletext (page 40).
For Cyrillic languages, we recommend that you select Russia
in case your own country/region does not appear in the list.

Wrong characters appear when viewing
NexTView.

• Using the menu system, select the “Language” and

“Country” options in the “Set Up” menu and set the language
and country/region in which NexTView is provided
(page 40).

No sound/Noisy sound

Good picture, no sound

• Press 2 +/– or

%

(Mute) on the remote control.

• Check that the “Speaker” option is set to “On” in the

“Features” menu (page 39).

Audio noise

• Make sure that the aerial is connected using the supplied

coaxial cable.

• Keep the aerial cable away from other connecting cables.
• Do not use 300-ohm twin lead cables as interference may

occur.

Menu item is not displayed.

• Some items cannot be selected depending on the signal or

other settings. Refer to the instructions on each menu item.

Strange sound

The TV cabinet creaks.

• Changes in room temperature sometimes cause the TV

cabinet to expand or contract, which can make slight noises.
This does not indicate a malfunction.

The TV ticks.

• An electrical circuit inside the TV is activated when the TV

is turned on. This does not indicate a malfunction.

The TV buzzes.

• There might be a surge sound when turning on the TV. This

does not indicate a malfunction.

Remote control does not function.

• Check that the remote control is set correctly for the device

you are using (VCR, TV, or DVD).

• If the remote control does not operate the VCR or DVD even

when the remote control has been set correctly to VCR or
DVD, enter the necessary code set as explained in “Remote
Control Configuration for VCR/DVD” (page 53).

• Replace the batteries.

The

(Standby/Sleep) indicator on the

TV flashes.

• Refer to “Self-diagnosis function” (page 57) and contact

your nearest Sony service centre.

Problem

Possible remedies

Advertising