Speco Technologies 8TH - Manual (Page 102)

User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10 101
5.4.2.3 Weekend Start / End
The Weekend Start Time indicates the specific day and time that a weekend
begins, for example, Fri 18:00. The Weekend End Time indicates the specific
time and day that a weekend ends, for example, Mon 06:00. Time is indicated
in 1-minute increments.
Note that the value you have set indicates when the regular Day and Night
scheduling ends, and Weekend recording begins.
5.4.3 Preset Record Configuration
The <Preset Config> is used to select the preset recording quality and frame
rate. Different default recording quality levels are offered for the user to
choose: <Best Quality>, <Standard>, <Extended Record>, <Event Only>,
<ezRecord> and <OFF>.
According to various Record modes, the preset configuration options for
normal and event status are described in terms of relative recording rate
(Picture per Second; PPS) and recording size for each channel in the table
below.
These preset conditions override any other quality and rate settings. The
default Preset Configuration setting is <Best Quality>. Refer to appendix
Preset Record Configuration for detailed information.
5.4.4 Per Camera Configuration
This submenu is used to set the Day / Night / Weekend PPS (Picture per
Second) and recording quality for each channel. The <Preset Configuration>
must be set to <OFF> for accessing these schedules.
The menu is displayed below is in Record mode: 352×240@240PPS in NTSC
/ 352×288@200PPS in PAL).
Per Camera Config
Cameral Select
Normal PPS
Normal Qlty
Event Max PPS
Event Qlty
Event Act
Day
7.5
MId
30
Best
Both
Night
7.5
Mid
30
Best
Both
CH1
Weekend
7.5
Mid
30
Best
Both