Speco Technologies 8TH - Manual (Page 110)

User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10 109
5.6.4 Email Attachment
The function allows the unit to send out brief AVI video regarding the event.
The number of the attached AVI video will be equal to the number of cameras
you connect to the unit. For example, if the unit has been connected with 8
cameras, then 8 video will be attached with the notice email. The total size of
the video will be about 1 Megabyte. Select <ON> to enable this function; and
<OFF> to disable it. The default is <OFF>.
NOTE: The video clips of the Email Attachment will ONLY be in *.avi
format. Please download the Divx Player from
www.divx.com to play
the *.avi files.
5.6.5 Alert Notification Setup
This function allows the user to send alert notifications to the CMS program
which had been installed to your computer. For detailed setup instruction,
please refer to the CMS user’s manual.
Alert Notification Setup
Alert Configuration Set
Alert Notification
Alert IP
Alert Port
Alive Interval 1
OFF
0. 0. 0. 0
9999
120 Sec
5.6.5.1 Alert Configuration Set
<Alert Configuration Set> provides 3 combinations of Alert Notification, IP,
and Port.
5.6.5.2 Alert Notification
4 options are included in this item; <OFF>, <Event>, <Alive>, and <Both>.
<OFF>: The Alert Notification is turned off.
<Event>: When the alarm is triggered, the DVR will send an alert message to
the CMS.
<Alive>: The DVR will send an alive message to the CMS every N second
just to show that the connections between the DVR and CMS are in
effect. The time interval N can be adjusted in <Alive Interval>.
<Both>: This enables the DVR to send both Event and Alive alert package
to the CMS.