Speco Technologies 8TH - Manual (Page 87)

User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10
86
5.1.9.2 Key Beep
This item is used to enable or disable the key tone. Select <ON> to enable the
key tone, or <OFF> to disable.
5.1.10 User Graphic Interface
The OSD system can be displayed in graphic mode or text mode according to
users’ preference. Set this menu to <Graphic> and the OSD system will be
displayed in GUI mode. Alternatively, set this menu to <Text> and the OSD
system will be displayed in text mode.
5.1.11 IP Camera Support
Enter this item to add IP cameras to the DVR. The DVR supports up to 4 IP
cameras. Select <0> will make the DVR act as a traditional analog DVR.
Select <1> to <4> allows users to add 1 to 4 IP cameras to the DVR.
After the <IP Camera Support> is set to <1> to <4>, the following message
will be displayed. Press ENTER to apply the changes, or ESC to exit.
Notice!!
DVR must reboot to apply the change
ENTER: Yes ESC: No
NOTE:
1. The existing database will NOT be re-formatted after switching to
this function.
2. Alarm I/O, Motion detection function, and audio of the IP camera
are NOT currently supported