Remote monitoring software, 1 remote monitoring system requirements – Speco Technologies 8TH User Manual

Page 131

Advertising
background image

User’s Manual

DVR-4TH/8TH/16TH Series

SPECO TECHNOLOGIES 07/10

130

6.

Remote Monitoring Software

The remote monitoring software is a remote browser-based software
application designed to operate with the DVR products. Using the software,
users are allowed to view live and recorded video, and configure the DVRs
remotely via a LAN, WAN or Internet on a personal computer.

The connected PC will automatically download the remote monitoring
software plug-ins from the DVR when the DVR is connected by entering its IP
address in the address bar on the browser.

Due to the setting items are similar to those listed in the DVR’s OSD setup
menu, please refer to the sections above for setting configuration of the
remote monitoring software.

The tasks can be performed with the remote monitoring software are listed
below:

• Remote viewing of live/ recorded video
• Remote setup of the DVR
• Remote control of dome cameras
• Alarm notification from the DVR
• Up to five connections to one DVR using the remote monitoring software,

including the preset “admin” and four other accounts

6.1

Remote Monitoring System Requirements

Items

Requirements
Minimum:
Intel® Pentium® M CPU 1.40GHz
RAM 512 MB

Personal Computer

Recommended:
Intel® Core™2 Quad CPU Q6600 @ 2.4GHZ
RAM 2 GB

Hard Disk Drive

Requires 20 MB for software installation

Operating System

Windows XP, Windows Vista

Web Browser

Microsoft Internet Explorer version 6.0 or above

Monitor Resolution Minimum 1024 x 768 with 16-bit color

Network Card

10Base-T (10 Mbps) or 100Base-TX (100 Mbps)
operation; must match the network configuration

Advertising