Siemens CP 1515 - Manual (Page 60)

&RQILJXULQJ ,QIUDVWUXFWXUH 1HWZRUNV
60 Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
4. Create a back-up file of the new configuration settings (optional but
recommended).
Repeat steps 2 to 4 for each of the Access Points RLMs that you wish to
install.
 6WHS   ,QVWDOOLQJ WKH $FFHVV 3RLQW 5/0
For installation instructions of the RLM hardware, please refer to the
documentation that was includeded with the RLM.
 6WHS   &RQQHFWLQJ WR WKH $FFHVV 3RLQW 5/0
To connect to the Radio Link Module, you need to address each Radio Link
Module via its IP address.
• If your network includes a BOOTP or DHCP server, the IP address will be
assigned automatically (refer to BOOTP and DHCP (page 231) for more
information about BOOTP/DHCP).
• In situations where no IP addresses are assigned automatically, the LM
factory default IP address will be 153.69.254.254.
You must change this factory-set IP address (153.69.254.254) upon first
configuration.