Siemens CP 1515 - Manual (Page 61)

&RQILJXULQJ ,QIUDVWUXFWXUH 1HWZRUNV
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
61
To connect to the RLM proceed as follows:
1. Start the RLM Manager program.
2. Select the Radio Link Module that you wish to configure from the list or
enter the IP address in the field
(QWHU WKH ,3 DGGUHVV IRU D VSHFLILF Ã
RLM (see Figure 11 Main RLM Manager window ).
• A new Radio Link Module is marked with a special icon.
• This list will display all Access Points RLMs located on the same IP
subnet as your management station (see also
Modifying the
Configuration (page 226) ).
• To gain access to Access Points RLMs on a different subnet or via a
dial-up connection, enter a specific IP address in the field
(QWHU WKH
,3 DGGUHVV IRU D VSHFLILF ÃAccess Point RLM.