Sony USER GUIDE V G N - C S 2 0 0 User Manual
Page 147
Troubleshooting
Why does movie playback show dropped frames when my computer is running on the
battery?
The battery pack is running out of power. Connect your computer to an AC power source.
Why do the images captured by the built-in MOTION EYE camera flicker?
This problem occurs when you use the camera under fluorescent lights due to the mismatch between lighting output
frequency and shutter speed.
To reduce flicker noise, change the direction of the camera or the brightness of camera images. In some software
applications, you can set an appropriate value to one of the camera properties (e.g. light source, flicker, etc.) to eliminate
flicker noise.
Why is the video input from the built-in MOTION EYE camera suspended for a few
seconds?
The video input may be suspended for a few seconds if:
❑ a shortcut key with the Fn key is used.
❑ the CPU load increases.
This is normal and does not indicate a malfunction.
What should I do if my computer becomes unstable when it enters a power saving mode
while the built-in MOTION EYE camera is in use?
❑ Do not place your computer into Sleep or Hibernate mode while you are using the built-in MOTION EYE camera.
❑ If your computer automatically enters Sleep or Hibernate mode, change the corresponding power saving mode setting.
To change the setting, see Using the Power Saving Modes
.