Inserting an expresscard module – Sony USER GUIDE V G N - C S 2 0 0 User Manual
Page 54
54
Using Your VAIO Computer
Inserting an ExpressCard Module
!
Your computer is supplied with a slot protector in the ExpressCard slot. Remove the slot protector before you use the slot.
Use care when inserting or removing the ExpressCard module from the slot. Do not force it in or out of the slot.
✍
You do not need to shut down your computer before inserting or removing the ExpressCard module.
To insert an ExpressCard module
1
Locate the ExpressCard slot.
2
Push the ExpressCard slot protector so that the protector pops out.
3
Gently take hold of the ExpressCard slot protector and pull it out of the slot.
4
Hold the ExpressCard module with the arrow facing upward and pointing toward the slot.
5
Carefully slide the ExpressCard module into the slot until it clicks into place.
Do not force it into the slot.
✍
If the module does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.
Make sure you use the most recent software driver provided by the ExpressCard module manufacturer.