Sony RM-AX5000 - Manual (Page 10)

10
Setting the Remote
Commander
The Remote Commander (RM-AX5000) is preset at
the factory to operate Sony brand A/V Components
(see the table below.)
Default Components list
Displays Component
Label button
TV TV
DVD DVD player
CABLE Digital Cable Set Top Box
SAT Digital Satellite Receiver
DVR Digital Video Recorder
VCR Video Cassette Recorder
CD CD player
RCVR Receiver/Amplifier
Hardware button
TV TV
MOVIE DVD player
MUSIC CD player
Sony Components on this list can be operated
without setting.
See “Table of Preset Functions” (page 37) for the
functions of buttons for each Component.
If you operate a non-Sony A/V Component or
cannot operate a Sony Component, you need to set
the Component’s Preset code on the Remote
Commander first.
Non-Son Non-Sony component y component Non-Sony component
Non-Son Non-Sony component y component Non-Sony component
Non-Son Non-Sony component y component Non-Sony component
How to set up the
Remote Commander
There are two ways to make setups for the Remote
Commander: “On-PC Setup” with PC software and
“On-Remote Setup” directly on the Remote
Commander.
• On-PC Setup (Recommended)
“On-PC Setup” uses the supplied software, “RM-
AX5000 Custom Setup Tool” to set up the
Remote Commander. It allows you to easily make
all the necessary setups for the Remote
Commander (Component Preset codes, etc.)
Furthermore, you can add and customize a range
of setups which are not available with
On-Remote Setup.
• On-Remote Setup
“On-Remote Setup” is a way of setting up directly
on the Remote Commander. You can use it
immediately after presetting your Component.
However, some advanced setups are not available
with On-Remote setup (see the table on page 11.)
On-PC Setup On-PC Setup On-PC Setup
On-Remote Setup On-Remote Setup On-Remote Setup