Sony RM-AX5000 - Manual (Page 45)

45
Receiver/Amplifier (RCVR)
Button/Display
POWER
1-9, 0, ENTER
• (Dot)
INPUT
CH +, –
RECALL
VOL +, –
MUTING
GUIDE
MENU
EXIT
INFO
V, v, B, b
OK
m
H
M
z (Record)*
X
x
.
>
B•
•
b
PAGE +, –
SHIFT
BAND
SURR
MODE
GENRE SELECT
TEST TONE
CENTER–
CENTER+
REAR–
REAR+
WOOFER–
WOOFER+
D.IN–
D.IN+
5.1 INPUT
UTILITY + 1
UTILITY + 2
UTILITY + 3
UTILITY + 4
UTILITY + 5
UTILITY + 6
UTILITY + 7
UTILITY + 8
UTILITY + 9
UTILITY + 0
Note
POWER
1-9, 0, ENTER
+10
INPUT
TUNER+, –
VOLUME+, –
MUTING
MENU
EXIT
UP, DOWN, LEFT, RIGHT
OK
SHIFT
BAND
SURROUND
MODE
GENRE SELECT
TEST TONE
CENTER–
CENTER+
REAR–
REAR+
SUB WOOFER–
SUB WOOFER+
DIGITAL INPUT–
DIGITAL INPUT+
5.1 INPUT
VIDEO1
VIDEO2
AUX
TUNER
CD
TAPE
MD
TV
PHONO
DVD
Function
To turn the power on/off
Number buttons: Keys to use the tuner directly
ENTER: To enter a setting
To select numbers 10 and above
To change the input mode
To preset or tune the frequency higher/lower
Volume up/down on the receiver
To silence the sound on the receiver. Press again to return to the
previous volume level.
To call up the menu
To exit the menu
To move the cursor
To enter a selection in the menu
To shift band or preset select
To select the tuner band
To turn on/off the surrounnd mode
To select a sound field mode
To select a sound field genre
To output a test tone
To adjust the center speaker level
To adjust the center speaker level
To adjust the rear speaker level
To adjust the rear speaker level
To adjust the subwoofer level
To adjust the subwoofer level
To switch the digital input
To switch the digital input
To change the multi-channel of 5.1 ch and above
To select the input source: VIDEO1
To select the input source: VIDEO2
To select the input source: AUX
To select the input source: TUNER
To select the input source: CD
To select the input source: TAPE
To select the input source: MD
To select the input source: TV
To select the input source: PHONO
To select the input source: DVD
Page 1/3
Buttons
Display
(Label buttons)
Page 2/3
Page 3/3
Buttons
(SHIFT FUNCTION)
* To avoid mis-operation, the Remote Commander will only transmit z (record) button signals if the button is pressed
and held for over 2 seconds.