Sony RM-AX5000 - Manual (Page 26)

26
Setting by On-Remote Setup
The following section explains On-Remote Setup.
The settings preset by On-PC Setup cannot be
customized by On-Remote Setup. But you can
program signals from other remote controls.
Components preset by On-Remote Setup or signals
from other remote controls programmed by On-
Remote Setup can be imported to “RM-AX5000
Custom Setup Tool.”
Setting the Preset
codes
If you operate a non-Sony A/V Component or
cannot operate a Sony Component, preset your
Component to the Remote Commander.
Changing the preset
Component
LIGHT
TV
C1
UTILITY OTHER
C2 C3
MOVIE MUSIC
INPUT
POWER
ALL OFF
The Remote Commander is preset at the factory to
operate Sony brand A/V Components (page 10.)
These preset Components can be changed to your
Components.
Tips
• If ( ) appears at the lowest line of the display,
the display changes to the previous (next) page by
pressing each Label button.
• You can select the preset Component by pressing its
Function select button.
1
Press the UTILITY button repeatedly
until “UTILITY-3” appears on the display
title.
“UTILITY-3” appears as the display title.
2
Press the Label button “PRESET.”
“PRESET” appears as the display title, and
preset Components appear on the display.
3
Select the Component’s name you want
the Remote Commander to preset by
pressing the Label button. Then press the
Label button “CHANGE PRESET.”
The brand name and Preset code number appear
on the display.
Tip
When adding a new Component, press the Label
button “NEW” in the display. Then select the
Component’s type you want the Remote
Commander to add by pressing the Label button.
4
Select your Component brand by
pressing “ ” or “ .”
5
Confirm whether you can control your
Component by pressing the Hardware
buttons. If you cannot control, change the
Preset code number by pressing “ ” or
“ ,” and confirm again.
Note
If you cannot operate your Component after
learning steps (page 29), it will be necessary to
preset with the AUTO SEARCH function or
Learning function.
For the AUTO SEARCH function, see “Presetting
A/V Components by the AUTO SEARCH function”
(page 27.)
For the Learning function, see “Programming other
remote control signals” (page 29.)
4
1
2, 4
5
6