Amplifier operation, Selecting the component, Listening to fm/am radio – Sony Model STR-DK5 User Manual

Page 17: Selecting the component listening to fm/am radio

Advertising
background image

Ampl

ifier O

p

erati

o

n

masterpage:Right

lename[F:\Sony SEM

HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB04BSC_STR-DK5-
SP.fm]

17

GB

model name1[STR-DK5]

[2-656-285-14(1)]

1

Turn INPUT SELECTOR to select the
input.

The selected input appears in the display.

2

Turn on the component and start
playback.

Note

If you select any video components, set the TV’s
video input to match the component you selected.

3

Turn MASTER VOLUME to adjust the
volume.

Note

To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver.

To mute the sound

Press MUTING on the remote.

The muting function will be canceled when you
do the following.
• Press MUTING on the remote again.
• Turn the power off.
• Increase the volume.

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and AM
antennas to the receiver (see page 9).

Tip

The tuning scale differs depending on the area code as
shown in the following table. For details on area codes,
see page 2.

Automatic tuning

If you do not know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.

1

Turn INPUT SELECTOR to select the
FM or AM band.

The last received station is tuned in.

2

Press TUNING + or TUNING –.

Press TUNING + to scan from low to high;
press TUNING – to scan from high to low.
The receiver stops scanning whenever a
station is received.

In case of poor FM stereo
reception

If the FM stereo reception is poor and
“STEREO” flashes in the display, select
monaural audio so that the sound will be less
distorted.
Use the remote for the operation.

1

Press MAIN MENU repeatedly to select

TUNER

”.

2

Press

V or v repeatedly to select “FM

AUTO”.

3

Press

B or b repeatedly to select “FM

MONO”.

The FM reception switches to monaural.

Tip

You will not be able to enjoy the stereo effect, but the
sound will be less distorted. To return to stereo mode,
select “FM AUTO” in step 3.

Amplifier Operation

Selecting the component

To select the

Display

VCR

VIDEO 1 or
VIDEO 2

Satellite tuner

VIDEO 2

DVD player

DVD

Super Audio CD or
CD player

SA-CD/CD

Built-in tuner (FM)

FM and frequency

Built-in tuner (AM)

AM and frequency

Listening to FM/AM radio

Area code

FM

AM

SP, VN, TH

50 kHz

9 kHz

continued

GB01COV_STR-DK5-SP.book Page 17 Monday, February 20, 2006 6:34 PM

Advertising