Sony Model STR-DK5 - Manual (Page 29)

Ad
v
a
nced
Adjus
tments a
n
d Se
ttings
masterpage:Right
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB07ADV_STR-DK5-
SP.fm]
29 GB
model name1[STR-DK5]
[2-656-285-14(1)]
Using the CUSTOMIZE menu
to adjust the receiver
You can adjust various receiver settings using
the CUSTOMIZE menu.
Use the remote for the operation.
1
Press MAIN MENU repeatedly to select
“
CUSTOM ”.
2
Press V or v repeatedly to select the
parameter you want to adjust.
For details, see “CUSTOMIZE menu
parameters” on page 29.
3
Press B or b repeatedly to select the
setting you want.
The setting is entered automatically.
4
Repeat steps 2 and 3 to adjust the other
items.
CUSTOMIZE menu parameters
The initial setting is underlined.
x A.V.SYNC. X
(Time alignment)
• Y (Yes) (delay time : 68 ms)
The audio output is delayed so that the time gap
between the audio output and visual display is
minimized.
• N (No) (delay time : 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or Plasma monitor or projection TV.
• This parameter is only valid when you use a sound
field selected with the 2CH or A.F.D. buttons.
• This parameter is not valid when PCM 96 kHz or
DTS 2048 signals are input.
x DEC. XXXX
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
• AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
• PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to “DEC.
PCM”.
Note
When set to “DEC. AUTO” and the sound from the
digital audio jacks (for CD, etc.) is interrupted when
playback starts, set to “DEC. PCM”.
x DUAL XXX
(Digital broadcast language selection)
Lets you select the language you want to listen to
during digital broadcast. This feature only functions
for Dolby Digital sources.
• M/S (Main/Sub)
Sound of the main language will be output through
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
• M (Main)
Sound of the main language will be output.
• S (Sub)
Sound of the sub language will be output.
• M+S (Main + Sub)
Mixed sound of both the main and sub languages will
be output.
x [DIMMER]
(Brightness of the display)
Lets you adjust the brightness of the display in 3 steps.
x NAME IN
(Naming the inputs)
Lets you set the name of inputs selected with the input
buttons on the remote (except for TUNER). For details,
see “Naming preset stations and inputs” on page 30.
Advanced settings
GB01COV_STR-DK5-SP.book Page 29 Monday, February 20, 2006 6:34 PM