Sony CDP-CE105 - Manual (Page 5)

Getting Started Getting Started
5 EN
Hookups
When connecting the audio cord, be sure to match the
color-coded cord to the appropriate jacks on the
components: Red (right) to Red and White (left) to
White. Be sure to make connections firmly to avoid
hum and noise.
Amplifier CD player
INPUT
CD
L
R
LINE OUT
R L
Setting the voltage selector (except for
European, Canadian, and Singaporean
models)
Check that the voltage selector on the rear panel of the
player is set to the local power line voltage. If not, set
the selector to the correct position using a screwdriver
before connecting the mains lead to a wall outlet.
Connecting the mains lead
Connect the mains lead to a wall outlet.
Transporting the player
Before transporting the player, follow the procedure
below to return the internal mechanisms back to their
original position.
1
Remove all the discs from the disc tray.
2 Close the front cover and wait until “no dISC”
appears in the display.
3 Press POWER to turn off the player.
220-240 V
110-120 V