Sima Products Sima SUR-47 - Manual (Page 16)

Getting Started SUR-47 User’s Manual
12
Using Pre-Code to Program Devices
Follow these instructions to program a device using preprogrammed codes.
Press
or to select PRE-CODE，and then press OK.
Manually Selecting the Code
1.
Turn on the device you want
to program the SUR-47 to
control.
2. Select the device (for
example TV).
3. Check the preprogrammed
code list that was bundled
with the SUR-47 for the four-
digit code number of your
device. If no code is
displayed, that means this
device has no pre-code.
4. Enter the four-digit code
number and press YES button
to confirm the entry.
Note: If the code only has
one digit (for example, 0001),
you do not have to input the
preceding zeros; in this
example, press ‘1’.
5. Press the POWER button to
test the code. The device
you are trying to control
should turn on (or off) as you
press this button. If not, return
to Step 2 and try another
code.
You can also press or to decrease or increase the four-digit code
number.
Note: Some codes are designed to operate more than one model. It
may take several tries to find the code that works with your unit.