Sima Products Sima SUR-47 - Manual (Page 23)

SUR-47 User’s Manual Setting Up
19
Creating a New Macro
Follow these steps to create a new macro:
1. Press or to select NEW .
2. Press .
3.
Press the device key you want to use
for this macro (for example TV), and
then press any key to define as the
macro key. You hear three beeps to
indicate that macro creation mode
has started.
Note: If you select a key that already
has a macro stored in it, the new
macro will replace the old macro.
4. Press the key or button sequence that
you want to record.
5. Press YES . You enter the Delay and
Save screen. Do one of the following:
• Enter the number of seconds you
want to delay between each
command. For example, if you
want a six second delay
between turning on your TV and
then turning on your VCR, press
‘6’.
• Press YES to save the macro
and exit macro creation mode.
The following steps shows how to record a macro that turns on your TV, switches the TV to DVD viewing mode,
turns on the DVD, and plays a DVD. Create other macros to suit your needs.
1. Press the EXIT and YES
buttons to enter the SETUP mode.
9. Press the DVD device button
2. Press or to select MACRO. 10. Press YES to select a time delay (1-10
sec) for each step. (Press '0' on the
screen to select 10 seconds.)
3. Press OK to enter the MACRO
menu. 11. Press the DVD power button
4. Press OK to enter the NEW menu. 12. Press the DVD play key.
5. Press OK to enter the SET KEY
menu. 13. Press Yes To save the macro
6. Press the TV device button 14. Press Yes to exit the MACRO mode
7. Press the TV power button 15. Press EXIT twice to exit the SETUP
menu and return to the main menu.
8. Press the TV/Video key