Sima Products Sima SUR-47 - Manual (Page 17)

SUR-47 User’s Manual Specifications
13
6. Press YES to confirm the selection and save the settings or click EXIT
to exit.
Note: When you enter the Manufacture Code and an 'ERROR’ message
is displayed, it could be for two reasons:
1. That code number doesn't exist in the Manufacture Code table
yet.
2. That code number is not in the range of the Manufacture Code
table reserved for the default device screen
Selecting a Code Automatically
1.
Turn on the target device you want
to control.
2. Press the device hardware button
(for example TV).
3. Point the SUR-47 at the target
device.
Press the AUTO button. An “OK”
message displays while the SUR-47
automatically cycles through the
codes. Wait for the device to turn
on and then press the POWER
button or AUTO key to stop the
automatic search.
The last tried code is displayed in the upper right-hand corner. Test this
code by pressing the POWER button .
If it doesn't work, you may need to press the tuning down key
and
try a few of the previously scanned codes.
4. Press YES to confirm and save the settings or EXIT to exit.
Using the Learning Mode
Follow these instructions to detect and learn a remote control's configuration.
Before Using the Learning Function
Before you start using the SUR-47's learning function, please heed the following precautions:
• Not all infrared codes are learnable by the SUR-47. You may need to first collect the codes (see page 17
for more information) and then email them to Sima Products. New system firmware will be sent to you
allowing your SUR-47 to learn the codes.
• To change from a device that has already been programmed, delete all of the commands for the first
device before teaching new ones. For example, to operate the living room TV instead of the bedroom
TV, delete all commands for the bedroom TV first. Then re-configure the TV device screen for the living
room TV.
Code learning does not work with all devices. Select one device screen in advance before using code learning
mode. All keys except the quick channel keys, sleep, page and macro can be learned.