Selecting a language, Selecting the language for user prompts (displays) – Siemens OptiPoint 410 User Manual
Page 31
Making Calls – Basic Functions
31
Step by Step
Selecting the language for user prompts
(displays)
Your HiPath 4000 system can be configured for up to
five different languages. The first language pro-
grammed is the default. If your telephone has a lan-
guage key, you can program a different language.
The period of time for which the other language re-
mains active depends on the language option that has
been configured. There are two possibilities:
•
Static language option
The language remains programmed until you
select a different language.
•
Temporary language option
The language remains programmed until the end of
the next call, after which the system reverts to the
default language.
Selecting a language:
Press the key. The language selected appears on the
display for five seconds and is then set. Keep pressing
the key if you wish to select a different language.
Language
This user guide can be ordered in other languag-
es (not used in US)