Making calls – convenience functions, Answering calls, Group call and pickup – Siemens OptiPoint 410 User Manual
Page 32: Telephone in the idle state, In the course of a call, Ending the waiting call – back to the first, Picking up a specific call, Group call and pickup picking up a specific call
Step by Step
Making Calls – Convenience Functions
32
Making Calls – Convenience
Functions
Answering Calls
Group call and pickup
If a member of a pickup group does not answer a call
within 15 seconds (depending on the system), the other
members of the team hear an alerting tone.
Telephone in the idle state:
The telephone rings. The display shows: "Call for...".
n
and
Lift the handset and press the call pickup key. You have
now taken over the call.
or
Press the call pickup key only.
You are in the speakerphone mode (not available with
optiPoint 410 economy).
In the course of a call:
Press the call pickup key.
The first party waits while you are connected to the
waiting party
Ending the waiting call – back to the first:
Press the key.
Picking up a specific call
You hear another telephone ring and you know its sta-
tion number or a colleague asks you (verbally) to pick up
a call for a specific telephone.
If you do not know the number, you can have it dis-
played
n
Lift the handset.
>
:
Select and confirm.
p
Enter the station number of the telephone for which
you wish to (or have been requested to) pick up the call.
In this way you pick up the call.
Call pickup
Call pickup
Call pickup
Disconnect
Direct call pickup?