Siemens OptiPoint 410 - Manual (Page 86)

Step by Step
Making multiline calls
86
Cancelling the station fixed call forwarding
destination
Precondition: The telephone is in the idle state. A sta-
tion fixed forwarding destination has been saved
Æ page 85.
Only if it is not your primary line:
Press the line key for the required line.
Press the key. The lamp lights up.
The settings for station fixed forwarding for every line
are identical with the call forwarding function described
above. Therefore, for all further steps see
Æ page 20.
Deactivating call forwarding for a line
Precondition: The telephone is in the idle state. After a
line key has been pressed, an activated call forwarding
function is indicated on the display.
Only if it is not your primary line:
Press the line key for the required line.
With the call forwarding key:
Press the key. The lamp goes out.
Via the program/service key:
Press the key. The lamp lights up.
fi
Enter the service code.
or
> :
Select and confirm.
> :
Select and confirm.
> :
Confirm.
For further information see Æ page 20
Line
program/service
Line
Call forwarding
program/service
Feature settings?
Call forwarding?
Deactivate?