Sennheiser Tourguide Wireless Transmitter SR 2020 D - Manual (Page 14)

12
Putting the SR 2020 D into operation
Mounting only one
SR 2020 D
When mounting only one transmitter into the rack, use the
blanking plate
Ƹ
instead of the second transmitter.
̈
Hook the two rack mount “ears”
ƹ
to the front panel of the
transmitter.
̈
Secure the rack mount “ears”
ƹ
to the transmitter using two
of the supplied recessed head screws (M 3x6) respectively.
̈
Secure the blanking plate
Ƹ
to one of the rack mount
“ears”
ƹ
using two of the supplied recessed head screws
(M 6x10).
̈
If you are not front mounting the BNC output connector,
insert the two blanking plugs
ƻ
into the holes of the
blanking plate.
̈
Slide the transmitter into the 19” rack.
̈
Secure the rack mount “ears”
ƹ
to the rack.
Connecting the transmitter to the mains
̈
Pass the cable through the cable grip
¶
.
̈
Connect the cable of the mains unit to the DC IN socket
º
of
the transmitter.
̈
Plug the mains connector into the wall socket.
Connecting external devices
You can connect either a microphone ( Mic ) or an external audio
source ( Line , e.g. CD or MP3 player) to the transmitter.
To do so, use a suitable audio cable with a length of up to 3 m.
Ƹ
ƹ
ƹ
ƻ
2
¶ º