Sennheiser Tourguide Wireless Transmitter SR 2020 D - Manual (Page 18)

16
Operating the SR 2020 D
Exiting the operating menu
̈
Use the
̆
/
̄
rocker button
¿
to select the “ Exit ” menu and
press the SET button
´
.
The standard display is shown on the display panel.
Or:
̈
Press the ON button
²
until the standard display is shown
on the display panel.
Selecting the menus
The transmitter’s operating menu contains the following menus:
¿ ´ ²
Menu Function of the menu
“Channel” Selecting a channel
(see page 17)
“Frequency” Displaying the frequency of the current
channel (see page 17)
“Chan. mode” Selecting the channel mode
(see page 18)
“Input” Selecting the input signal
(see page 19)
“Sensitiv” Adjusting the input sensitivity
(see page 19)
“Phantom” Displaying the phantom power
(see page 20)
“Contrast” Adjusting the contrast
(see page 20)
“Lock” Activating/deactivating the lock mode
(see page 20)
“Reset” Loading the factory-preset default settings
(see page 21)
“Version” Displaying the current software version
(see page 21)
“Exit” Exiting the operating menu